Boiler Gaskets H

Joints for inlet-hand assemblies and pipe cover for boilers. “h” style joints are manufactured in their nominal thickness of 0.125 “and 0.175” to fit the designs of the assemblies.
Hand-entry and pipe cover since they have narrow seating surfaces and high sealing pressures.
Special 0.250 “joints are recommended for use in assemblies with wide seating surfaces and low sealing pressure. Where there are settlement surfaces.
Worn or deteriorated the 0.250 “thick gasket will allow additional flow within the irregularities.
When ordering together style “h”, the following information should be provided:

1. name and code number of the boiler or equipment manufacturer.
2. shape of the board.
3. interior dimensions of the board.
4. width of the flange gasket.
5. joint thickness)
6. operating pressure range.
7. operating temperature.
8. desired type of steel.ac